# 6.9.1.2 Acrylic-Based Emulsions

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/6.9.1.2-acrylic-based-emulsions/)

##### 6.9.1.2 Acrylic-Based Emulsions

_Figure 199 Clear labels_

![Figure 199 Clear labels](/en/manuals/bonding/assets/img/adhesive-acrylicemulsion-label.jpg)

Pressure Sensitive Adhesives (PSAs) are tacky and are mainly used for labels. It is necessary to first evaporate the water and then apply a release paper to make removing the label easier. The performance of these products is measured in terms of tack, peel and shear force. It is important to have a very clean surface before applying these adhesives. These products have a high temperature performance of around 50°C (122°F).

PSAs are ideal for the clear labels found on bottles because they are clear when dry.