# 5.3.2 Calculating Adhesive Bead Size

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/5.3.2-calculating-adhesive-bead-size/)

#### 5.3.2 Calculating Adhesive Bead Size

Once the bond line dimensions have been calculated and the overall volume of adhesive has been determined, the next step involves factoring in the squeeze-out and calculating the appropriate bead size for dispensing. At this point, a predefined length of bond geometry based on the part design will have been established. Using the volume, bond length and radially defined bead geometry, calculating the required bead diameter is quite straightforward.

For example, here are calculations for bonding the shell of a dry freight shipping container:

20 metal components Production - 2.54 cm (1.00 in) wide - 163.50 cm (64.37 in) long - 0.10 cm (0.04 in) gap - 4,000 containers/year - 13-14 containers/day - 1C adhesive cost: $20 per 300 ml cartridge - Manual application: Squeeze-out factor 20% Recommend the (1) bead diameter needed to properly fill the gap and utilise all of the available surface area. Then, calculate adhesive usage (2) per container, (3) per year, (4) per day and (5) cost.

_The rest of this section requires sign-up: https://www.loctitex.com/en/manuals/bonding/5.3.2-calculating-adhesive-bead-size/_