# 5.2.1.11 Calculating Strength in Bonded Assemblies

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/5.2.1.11-calculating-strength-in-bonded-assemblies/)

##### 5.2.1.11 Calculating Strength in Bonded Assemblies

No matter the application, industry, material or adhesive, engineers and technicians are always asking a simple question: How will we know an adhesive is strong enough? In a world where many mechanical assembly methods are being replaced with chemical adhesive bonding, ensuring the strength, safety and reliability of a finished assembly is of the utmost importance. There are as many ways of testing strength as there are assembled parts, ranging from pull-out strength tests on bonded medical needles to head-on crash testing of automobiles in windscreen bonding applications. Different failure modes can also be tested. For example, peel strength may be more important than tensile or shear strength in a highly flexible assembly. Another example is that impact resistance might be the most important factor for a structural adhesive used to bond body panels on a vehicle.

_Figure 137 One of the best examples of adhesive qualification in the window glazing industry is crash testing. Since windscreen bonding adhesives play an important role in safety, it is important that this type of testing is conducted prior to widespread use_

_The rest of this section requires sign-up: https://www.loctitex.com/en/manuals/bonding/5.2.1.11-calculating-strength-in-bonded-assemblies/_