# 5.1.3.8 Recessed Double Strap Joint

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/5.1.3.8-recessed-double-strap-joint/)

##### 5.1.3.8 Recessed Double Strap Joint

A recessed double strap joint is made by mechanically machining the joint ends and creating a butt connection reinforced by two straps or belts. It does not alter the joint dimensions but creates a larger bonding area and a better distribution of stresses. The processing or machining to achieve this joint configuration is complex; however, this joint provides high flexural strength and is well suited to handling a wide variety of stresses, including peel, shear and impact. This is one of the most effective joints that can be created with adhesives.

_Figure 111 Recessed double strap_

![Figure 111 Recessed double strap](/en/manuals/bonding/assets/img/bonded-adhesive-joint-design-recessdoublestrap-strong.jpg)