# 5.1.3.12 Overlap Joint, Tapered Edges (Bevelled Lap Joint)

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/5.1.3.12-overlap-joint,-tapered-edges-bevelled-lap-joint/)

##### 5.1.3.12 Overlap Joint, Tapered Edges (Bevelled Lap Joint)

An overlap joint with tapered edges (bevelled lap joint) is more efficient than a simple lap joint because the bevelled edge, created by tapering the ends of the substrates allow for a more even distribution of load. This reduces the concentration of stress at the joint ends and prevents mechanical lifting due to external forces catching the substrate edge. This joint is also aesthetically more pleasing than a simple lap joint.

_Figure 115 Overlap joint with tapered or bevelled edges_

![Figure 115 Overlap joint with tapered or bevelled edges](/en/manuals/bonding/assets/img/bonded-adhesive-joint-design-overlapwithbevel.jpg)