# 4.5.5 UV Resistance

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/4.5.5-uv-resistance/)

#### 4.5.5 UV Resistance

The adhesive used in external applications or applications in transparent or translucent substrates may be exposed to UV light. Exposure to sunlight and some artificial lights can have adverse effects on the performance life of adhesives or sealants. UV radiation can break the chemical bonds in a polymer. This process is called photodegradation and can ultimately cause cracking, scaling, colour changes and loss of the physical properties of an adhesive. Where resistance to UV light is a concern, absorbers and inhibitors of UV radiation may need to be added as surface coatings or additives.

The important aspect is that once photodegradation has started, it triggers a circular chain reaction that accelerates degradation, unless stabilisers are used to interrupt the oxidation cycle.

_Figure 103 UV radiation may cause degradation of properties_

![Figure 103 UV radiation may cause degradation of properties](/en/manuals/bonding/assets/img/uv-ultraviolet-radiation-degradation-parts-substrate.jpg)

_Table 15 Summary of adhesive environmental conditions resistance_

Temperature resistance Moisture Chemical UV 2C Epoxy High -55°C to 121°C (-67°F to 250°F) Excellent Excellent Good 1C Polyurethane Medium -40°C to 80°C (-40°F to 176°F) Moderate Good Poor 2C Polyurethane Medium -40°C to 130°C (-40°F to 266°F) Moderate Excellent Moderate Reactive Hotmelt Polyurethane Medium 130°C (266°F) Moderate Good Moderate Modified Silicone Polymer Medium 80°C (176°F) Moderate Good Excellent 1C and 2C Silicone Very High 200°C (392°F) Good Excellent Excellent Anaerobic High -55°C to 121°C (-67°C to 250°F) Good Excellent Excellent Acrylic High -55°C to 120°C (-67°F to 248°F) Good Good Good Cyanoacrylate High -55°C to 120°C (-67°F to 248°F) Poor Moderate Good