# 4.3.1.2 Solvent-Based Cleaners

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/4.3.1.2-solvent-based-cleaners/)

##### 4.3.1.2 Solvent-Based Cleaners

Solvent-based cleaners are a good choice for removing oils, grease, paint, cutting fluids and moisture. An advantage of using solvent-based cleaners on metal is their ability to eliminate moisture that may cause rusting. They should be used with care on plastics as some plastics are vulnerable to chemical attack by solvents.

Solvent-based cleaning processes usually involve dip baths, closed solvent steam chambers or manual wiping processes commonly used for low part volume. While solvent-based cleaners will not dissolve metallic swarfs or inorganic contaminants, they may loosen them by eliminating any oil or grease holding them to the surface.

_Table 12 Efficiency of solvent-based cleaners on contaminants_

CONTAINMENT HYDROCARBONS ALCOHOLS KETONE, ESTER Cutting Fluid ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/check.svg) Corrosion Inhibitor ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/check.svg) Waxes ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/check.svg) Lubricants ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/check.svg) Liquid Resins ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/check.svg) Liquid Adhesives ![](/en/manuals/bonding/assets/img/cancel.svg) ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/minus.svg) Fingerprints ![](/en/manuals/bonding/assets/img/cancel.svg) ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/check.svg) Silicone Oil ![](/en/manuals/bonding/assets/img/cancel.svg) ![](/en/manuals/bonding/assets/img/cancel.svg) ![](/en/manuals/bonding/assets/img/cancel.svg) Release Agent ![](/en/manuals/bonding/assets/img/minus.svg) ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/check.svg) ![](/en/manuals/bonding/assets/img/check.svg) Recommended ![](/en/manuals/bonding/assets/img/minus.svg) Acceptable Resistance ![](/en/manuals/bonding/assets/img/cancel.svg) Not Recommended

Solvent-based CleanersBENEFITS CONSIDERATIONS Ideal before bonding No residues left on the substrate Impurity dilution (oil, etc.) Immediate evaporation Suitable for manual cleaning processes Can attack plastics (e.g. stress cracking) No cleaning of inorganic impurities (e.g. salt) May have flammable labelling Contain VOC’s (regulatory considerations)

_The rest of this section requires sign-up: https://www.loctitex.com/en/manuals/bonding/4.3.1.2-solvent-based-cleaners/_