# 3.1.12 Renewable Energy

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/3.1.12-renewable-energy/)

#### 3.1.12 Renewable Energy

Wind power has developed and evolved in recent years, mainly because of the increased use of adhesives to construct wind turbines. Wind turbines were previously made of galvanised steel, but aluminium and composite materials are now used for their lightweight properties. This material change also reduces the risk of corrosion. Wind turbines can be placed in any environment and are exposed to constant vibrations; this increases the risk of rivets and screws loosening and causing failures. Such failures could cause a major catastrophe: wind turbines are large, and the blades are placed high up and often travel at high speeds. Using adhesives provides better stress distribution over the entire bond area instead of concentrating the stress at each mechanical fastener.

In addition, the use of adhesives makes the rotor blades lighter, providing increased efficiency. Bonding the blades also allows for more aerodynamic designs, further increasing their effectiveness. Carbon-reinforced composites are regularly used for their physical characteristics and compatibility with adhesives. Should rotor blades sustain damage from hitting flying objects, lightning strikes, edge erosion, tip fractures or delamination, the blades are repaired in situ due to the complexity and cost of transporting the blades. Adhesives play a crucial role in repairing the damage because they offer a fast processing speed and versatility that can quickly return the turbine to a serviceable condition.

_The rest of this section requires sign-up: https://www.loctitex.com/en/manuals/bonding/3.1.12-renewable-energy/_