# 2.2.5.1 Machining Accuracy

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/2.2.5.1-machining-accuracy/)

##### 2.2.5.1 Machining Accuracy

The machining accuracy of any component is affected by many elements, particularly two core factors:

1. Surface finish 2. Tolerance

Grinding, honing, buffing, polishing, lapping and burnishing are common methods used to achieve the desired surface finish. Surface finish (Ra) is the average of the maximum (peaks) and minimum (valleys) values of the roughness profile (height) for the given material. A tighter or narrower range for these maximum and minimum values will result in a more refined surface finish and a smoother topology.

Changing the designated surface finish of a material from 3.2 µm to 0.8 µm (125 µin to 32 µin), for example, can significantly increase associated machining costs. The key reasons behind this increase are the manufacturing process changes and the number of machine passes required to achieve a finer surface finish, which increase the time spent producing a single component.

_Figure 56 The surface finish is highly dependent on the manufacturing process being used_

_The rest of this section requires sign-up: https://www.loctitex.com/en/manuals/bonding/2.2.5.1-machining-accuracy/_