# 2.2.1.7 Overview of Substrate Properties

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/2.2.1.7-overview-of-substrate-properties/)

##### 2.2.1.7 Overview of Substrate Properties

Table 3 presents an overview of the substrate properties for comparison and Table 4 provides an overview of substrate combinations as they relate to joining methods.

MECHANICAL PROPERTIES ELECTRICAL PROPERTIES PHYSICAL PROPERTIES THERMAL PROPERTIES Density [g/cm3] Tensile Strength [N/mm2]Elongation at Break [%]E-modulus [N/mm2]Specific Electrical Resistance [Ωmm2/m]Humidity Absorption [%]Temperature Range [C°]Surface Energy [mN/m]Chemical Resistance Corrosion Resistance Transparency UV Resistance METAL (Annodised) Aluminium 2.7 60-700 45-60 70,000 0.0028 0 up to 350 840 good good no very good (Stainless) Steel 7.9 300-1,250 6-40 210,000 0.100-0.200 0 up to 1,100 700-1,100 good good no very good PLASTIC Standard 0.9-1.4 11-80 3-700 200-3,200 &gt;10160-2-40 up to 100 29-51 good very good as well as good Engineering 1.0-1.4 27-86 1-300 690-8,200 &gt;10100.3-3.0 -100 up to 135 33-54 good very good as well as good High Performance 1.1-2.4 7-200 2-650 300-31,000 &gt;10170.01-1.10 -200 to 260 15-47 good very good as well as good Rubber 0.9-1.6 6-30 450-800 10-5,000 &gt;1013 -> 1016n/a -50 up to 300n/amoderate very good no moderate Composites 1.5-2.1 330-1,100 1-4 24.000-100,000 n/a n/a up to 400 n/a good good no good Glass 2.5-2.6 30-100 0 70,000 &gt;1013 -> 10170 up to 850 45-500 very good very good yes very good Hardwood and Softwood 0.4-0.8 11-36 [1]n/a 9,000-17,000 &gt;1010 ->1015n/a up to 60 40-50 n/a n/a no very good (1) Parallel to the fiber direction

_The rest of this section requires sign-up: https://www.loctitex.com/en/manuals/bonding/2.2.1.7-overview-of-substrate-properties/_