# 1.1.4 Mechanical Joint: Folding or Clinching

> From: LOCTITE®X Digital Manual for Bonding (https://www.loctitex.com/en/manuals/bonding/1.1.4-mechanical-joint-folding-or-clinching/)

#### 1.1.4 Mechanical Joint: Folding or Clinching

Two pieces of sheet metal can be connected to each other by folding or bending tabs in the form of a buckle and a clamping slot in a folded joint. This assembly method is relatively quick, reliable, economical and convenient.

However, folded metal joints do not seal and may be susceptible to corrosion. These types of joints require a relatively long contact area to provide strength and are not suitable for plastics.

_Figure 10 Examples of mechanically folded joints_

![Figure 10 Examples of mechanically folded joints](/en/manuals/bonding/assets/img/mechanically-folded-joints-sealing-4.jpg)

![Figure 10 Examples of mechanically folded joints](/en/manuals/bonding/assets/img/mechanically-folded-joints-sealing-5.jpg)

![Figure 10 Examples of mechanically folded joints](/en/manuals/bonding/assets/img/mechanically-folded-joints-sealing-6.jpg)

![Figure 10 Examples of mechanically folded joints](/en/manuals/bonding/assets/img/mechanically-folded-joints-sealing-7.jpg)